Mavic 500 RD / 550 RD
Back
Report
Main Photo
Category:  Hubs
Name:  Mavic 500 RD / 550 RD
Brand:  Mavic
Model:  500 RD / 550 RD
Years:  Mid 1980's - Early 1990's
Country:  France
Weight:  462 grams
Added By: Jenser on 10/06/07
Updated By: MGTS on 03/13/13
Additional Photos - click for full size
Mavic 500 RD / 550 RDMavic 500 RD / 550 RDMavic 500 RD / 550 RDMavic 500 RD / 550 RDMavic 500 RD / 550 RDMavic 500 RD / 550 RDMavic 500 RD / 550 RD
 Verify Component Photos
Gear Compatibility FreewheelFront Bearing Size/CountSealed bearings
Rear Bearing Size/CountSealed bearingsRear Spacing120mm; 126mm; 130mm
Spoke Drilling24; 28; 32; 36; 40Flange SizeLow Flange
Gear Threading/Pattern English/ISO: 1.375 x 24 TPI;
French: 1.366" x 25.4 tpi
Body MarkingsMAVIC on center of barrel. Early models have Mavic opposite flange as well as barrel.
Axle MaterialAluminumShell MaterialAluminum
General Information
The 500 hub was originally introduced by Mavic in 1975 and featured a sealed bearing system. The 500 was soon replaced by the 500 RD which allowed the user remove the axle and adjust the bearings- similar to Phil Wood's FSA. The 550 RD  version of the hub, considered the Pro or Team Model, was essentially the same overall design with two major exceptions. First, both the axle and shell were anodized to provide strength, second, the drive side bearing was moved farther outboard and closer to the freewheel*.  Additionally, the 550 featured a quick release that used both alloy and steel parts, whereas the 500 used steel.

The hub was produced up until the 90's with very little changes- mostly the placement of logos and decals.  They were sold alongside Mavic's cassette hub models such as the 571/572 and 577. 

Similar models were also produced. The 510 was the same design as the 500 RD, but featured a 80mm spaced front axle and the 501- the same 500 series hub, but the rear was spaced at 130mm to accomodate 8sp freewheels.

Note- the last photo in the set is a pair of hubs modified by an ebay seller and was not an official mavic offering.


*This is one of the easier ways to differentiate the 500 from the 500RD- the bearing on the RD is exposed on the drive side while the 500 has a dust cap.
Quality:Rarity:
 
 
See Incorrect Information? Log-in to submit report.  
Additional Resources
Marketplace:Looking to buy one of these?Sell one like this
Resources:Reference & ChartsCatalogsExternal Resources
Component VariationsView Detailed List  Manage Variations
Variations of Component exist (Component is 1 of 4)BrandGroup
Mavic 501Mavic
Mavic 520 Track PistaMavic
Mavic 580 CXMavic
Brand Information(click to expand)
 Mavic is best known for its lightweight aluminum rims and complete wheels, which they continue to produce today.  They also produced a full range of drive train components in the past.  Mavic made a failed attempt to popularize an electronic shifting system in the early 90's.
 
User Comments
Sign-in Required
  Loading Comments


By pressing Verify below, you express verification that the photos shown are indeed of the component listed. Please do not verify if you are not sure that all photos are of the correct item. If you identify a photo that is NOT of the correct item, please use the Report feature to flag that photo.

Note: You can not verify photos that you have uploaded.
Royal Enfield
VeloBase v.2.7.8 rev.5 - a Fischer Frameworks application, Copyright ¬© (2014) - All rights reserved.

Find the information on VeloBase.com useful? Please consider donating a few dollars towards the web-hosting cost. Thank you.