|
Photo Credit: VeloBase User BlankCrows
|
|
Name: | Jack Taylor Headbadge |
Brand: | Jack Taylor |
Badge Type: | Painted or Decal |
Frame Types: | Vintage Lightweights |
Country: | England |
Years: | 1980's |
Added By: | BlankCrows on 10/22/07 |
Updated By: | cguder on 01/04/10 |
Additional Photos - click for full size |
|
|
This is the so-called Mondrian-style of transfers. The Jack Taylor-expert Joel Metz says on his website that "These transfers, sometimes seen referred to as "modern" transfers on
Jack Taylor invoices, were designed by Mrs. Dave Radmore of
(coincidentally) Stockton, California - one of the couple from Stockton
who visited the Taylors back in the 1950s to purchase a tandem, as
mentioned in The Custom Bicycle." And again Joel Metz: "Early Taylors came with what are termed by Norman "gothic" transfers,
later frames (post-1956) mostly had the newer "mondrian" transfers. The
older "gothic" transfers were still available upon request, and
actually became prevalent again in the later years as the "mondrian"
transfers began to run out."
Source: http://www.blackbirdsf.org/taylor/transfers.html
|
Under the leading of the eldest brother Jack three of four Taylors (all have been enthusiastic for cycling) developped their sideline business of making racing bike frames to the nowadays highly esteemed name of vintage bicycles. At first influenced by Claud Butler bicycles, since the beginning of the 1950ies their acknowledgement of french bicycle makes as René Herse and Alex Singer and the possibility to import french components has been an important kick to their reputation as an highly estimated touring bicycle and tandem builder. Also it was exceptional that Jack Taylor began early to weld (bronze-welding with so-called Sifbronze rods) bicycle frames in the absence of lugs during the war. That enabled them to built frames with non-standard angles and this decisively released tandem production. Another point was their very good connection to Reynolds, so they could fulfill their needs concerning special tube features. That's the reason why they have preferred 531-tubing, but they have also used other makes like Columbus. After not selling a huge amount of somewhat mass produced frames the Taylors began to build frames for individual demand. This has been the preliminary action to conquer the north-american market, which became a key to success since the beginning of the 1970ies, not least for the exceptional finishing of the frames. By closing their firm in 1990 they had built 8628 frames.
Source: Jack Taylor Cycles. Interview with Jack, Peggy and Ken Taylor by Mark Lawrence in May 2008, published in: Bicycle Quarterly Summer 2009
Further information -not always consistent to the here quoted- you will find in the Jack Taylor chapter in The Custom Bicycle by M.J.Kolin and D.M. de la Rosa, 1979