 Page 1 of 2
|
| |
| |
|
|
| Model: | ProRacer |
| Brand: | Koga Miyata |
| Category: | Road Race |
| Years: | Late 1970's - Early 1980's |
| Country: | Netherlands |
| Production: | Factory Production |
| Sold As: | Complete Bicycle, Bare Frameset |
| Material: | Steel |
| Construction: | Lugged |
| Drivetrain: | Derailleurs |
| Wheel Size: | 700c |
| Added By: | Elev12K on 01/31/10 |
| Updated By: | JFischer on 12/15/10 |
Frame Example Photos
This Frame Model has 1 Frame Example with additional photos. Choose from the options below to view them.
 View First Photo from each Example
View All Frame Example Photos
|
|
| Model General Information |
| Semi-professional level roadbike directly under the Pro-Luxe or FullPro (from '81 on).
Dura Ace equipped. Since the introduction of Dura Ace EX groupset equipped with that groupset.
Early frames features full Tange Champion #2 tubing and were also available as frame only. Later frames used Champion #2 in main triangle and Miyata's own Hi-Manga for fork and tail. All frames came with open bottom bracket shell and neat lugwork with cut outs.
From 1981 on ProRacer's were specced with Full Power Drive (FPD) geometry, a geometry designed around Shimano's 'Dyna Drive' concept. |
 |
| Primary Example: | Koga Miyata ProRacer (1981) |
| Years: | 1981 | Sold As: | Complete Bicycle |
| Bottom Bracket: | English/ISO: 1.370 x 24 | Brake Mounting: | Recessed |
| Brake Bridge: | | Derailleur Cable Routing: | Brazed-On over BB guides |
| Lug Style: | Short Point with cutouts | Brake Guides: | 3x Double Loop style on top tube |
| Fork Style: | Curved Blades | Seat Stays: | |
| Fork Crown Style: | Fully Sloping | Main Tubing: | |
| Rear Dropouts: | | Color(s): | |
|
