Mavic 531
Main Photo
Category:  Hubs
Name:  Mavic 531
Brand:  Mavic
Model:  531
Years:  1990's
Country:  France
Weight:  245 grams (Spec),
245g front, 300g rear (both weights with skewers)
Added By: nprenet on 11/13/07
Updated By: Xab on 02/25/22
Additional Photos - click for full size
Mavic 531
Gear Compatibility FreewheelFront Bearing Size/CountSealed bearings
Rear Bearing Size/CountSealed bearingsRear Spacing130-135mm; 130mm
Spoke Drilling32; 36Flange SizeLow Flange
Gear Threading/Pattern Body Markings"Mavic 531" on the outer part
Axle MaterialShell MaterialAluminum
General Information
Same design as the 501 hubs, but for MTB use, with 135mm spacing. Also has a removable spacer on the non-drive side for 130mm spacing/ 7 or 8 speed freewheels. Dismantled using two 5mm allen wrenches.
See Incorrect Information? Log-in to submit report.  
Additional Resources
Resources:Reference & ChartsCatalogsExternal Resources
Brand Information(click to expand)
 Mavic is best known for its lightweight aluminum rims and complete wheels, which they continue to produce today.  They also produced a full range of drive train components in the past.  Mavic made a failed attempt to popularize an electronic shifting system in the early 90's.
User Comments
Required
  Loading Comments

By pressing Verify below, you express verification that the photos shown are indeed of the component listed. Please do not verify if you are not sure that all photos are of the correct item. If you identify a photo that is NOT of the correct item, please use the Report feature to flag that photo.

Note: You can not verify photos that you have uploaded.
VeloBase v.2.8.7 - a Fischer Frameworks application, Copyright ¬© (2023) - All rights reserved.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Find the information on useful? Please consider donating a few dollars towards the web-hosting cost. Thank you.