Mavic 531
Back
Report
Main Photo
Category:  Hubs
Name:  Mavic 531
Brand:  Mavic
Model:  531
Years:  1990's
Country:  France
Added By: nprenet on 11/13/07
Updated By: nprenet on 11/14/07
Additional Photos - click for full size
Mavic 531
Gear Compatibility FreewheelFront Bearing Size/CountSealed bearings
Rear Bearing Size/CountSealed bearingsRear Spacing130mm; 130-135mm
Spoke Drilling32; 36Flange SizeLow Flange
Gear Threading/Pattern Body Markings"Mavic 531" on the outer part
Axle MaterialShell Material
General Information
Same design as the 501 hubs, but for MTB use, with 130mm spacing. Also has a removable 4mm spacer for 135mm spacing/ 7 or 8 speed freewheels. Dismantled using two 5mm allen wrenches.
Quality:Rarity:
 
 
See Incorrect Information? Log-in to submit report.  
Additional Resources
Marketplace:Looking to buy one of these?Sell one like this
Resources:Reference & ChartsCatalogsExternal Resources
Brand Information(click to expand)
 Mavic is best known for its lightweight aluminum rims and complete wheels, which they continue to produce today.  They also produced a full range of drive train components in the past.  Mavic made a failed attempt to popularize an electronic shifting system in the early 90's.
 
User Comments
Sign-in Required
  Loading Comments


By pressing Verify below, you express verification that the photos shown are indeed of the component listed. Please do not verify if you are not sure that all photos are of the correct item. If you identify a photo that is NOT of the correct item, please use the Report feature to flag that photo.

Note: You can not verify photos that you have uploaded.
MAF
VeloBase v.2.7.8 rev.5 - a Fischer Frameworks application, Copyright ¬© (2018) - All rights reserved.

Find the information on VeloBase.com useful? Please consider donating a few dollars towards the web-hosting cost. Thank you.