Dunlop
Back
Report
Main Photo
Category:  Rims
Name:  Dunlop
Brand:  Dunlop
Model:  
Years:  N/A
Country:  England
Weight:  729 grams
Added By: ThermionicScott on 12/03/17
Updated By: ThermionicScott on 12/06/17
Additional Photos - click for full size
DunlopDunlop
 Verify Component Photos
Rim Type Low-pressure clincherMaterialSteel
Rim Size650a (590 mm)Spoke Drillings32; 40
Label Markings26 X 1 3/8 DUNLOP 26 X 1 3/8 E.A.3. MADE IN ENGLANDValve DrillingSchrader
Rim Height (mm)12.5Rim Outer Width (mm)25.4-28.6
EyeletsNoneSeam Joint Welded
FinishBright Chromed Steel  
Wheel Lacing Data
Rim Size 590mmERD 583
General Information
This is the front rim from my 1964 Armstrong 3-speed.  By this point, it was a Raleigh sub-brand.  I replaced the rim with a Sun CR-18, which had a slightly smaller ERD.

Rim sidewalls are angled outward (not parallel) and so the rim width is 1" at the narrowest and 1-1/8" at the widest, with the inner width at about 13/16" and the rim height about 1/2".

Weight is for the 32h drilling.  I'm sure the 40h version weighs ever so slightly less.  :^)
Quality:Rarity:
 
 
See Incorrect Information? Log-in to submit report.  
Additional Resources
Marketplace:Looking to buy one of these?Sell one like this
Resources:Reference & Charts
User Comments
Sign-in Required
  Loading Comments


By pressing Verify below, you express verification that the photos shown are indeed of the component listed. Please do not verify if you are not sure that all photos are of the correct item. If you identify a photo that is NOT of the correct item, please use the Report feature to flag that photo.

Note: You can not verify photos that you have uploaded.
Maillard
VeloBase v.2.7.8 rev.5 - a Fischer Frameworks application, Copyright ¬© (2017) - All rights reserved.

Find the information on VeloBase.com useful? Please consider donating a few dollars towards the web-hosting cost. Thank you.