Pelissier 2000 Professional (high flange)
Main Photo
Category:  Hubs
Name:  Pelissier 2000 Professional (high flange)
Brand:  Pelissier
Model:  2000 Professional
Years:  Mid 1970's
Country:  France
Weight:  184 grams (avg)
View Weight List
Added By: CV-6 on 08/05/07
Updated By: fightfooter on 11/24/14
Additional Photos - click for full size
Pelissier 2000 Professional (high flange)Pelissier 2000 Professional (high flange)Pelissier 2000 Professional (high flange)Pelissier 2000 Professional (high flange)Pelissier 2000 Professional (high flange)Pelissier 2000 Professional (high flange)Pelissier 2000 Professional (high flange)Pelissier 2000 Professional (high flange)
 Verify Component Photos
Gear Compatibility FreewheelFront Bearing Size/CountSealed bearings
Rear Bearing Size/CountSealed bearingsRear Spacing120mm; 123mm
Spoke Drilling24; 28; 36Flange SizeSmall and large flange available
Gear Threading/Pattern English/ISO: 1.375 x 24 TPI;
French: 1.366" x 25.4 tpi;
Italian: 1.378" x 24 tpi
Body MarkingsPelissier 2000, Made In France Or as in this example, just Perrin
Axle MaterialSteelShell MaterialAluminum
General Information
Pelissier was actually produced by Perrin, a company making hubs since the 50s.  Top of the line hub, with sealed annular ball-bearings. Sought after by time-trialists.  Go  to  for more information.
Correction on information for the above link -  Perrin was connected with Maillard in the 1970's, producing hubs under the Perrin Maillard label by Ets. Perrin & Courson of Boen.
See Incorrect Information? Log-in to submit report.  
Additional Resources
Resources:Reference & Charts
Component VariationsView Detailed List  Manage Variations
Variations of Component exist (Component is 1 of 2)BrandGroup
Pelissier 2000 Professional (low flange)Pelissier
Brand Information(click to expand)
Etablissement CL. Pelissier & FILS was established in 1909 in St. Entienne - Loire. They made Hubs, Chains, Pedals, Toe clips and thorn catchers under the Pelissier brand.  The earliest hubs are branded only with "C P" on them.  In the 1970s another company from Boen, Ets. Perrin & Courson also produced Pelissier branded hubs as well as producing hubs under the "Perrin Maillard" label.

Christoph Ulbrich: the Pélissier brand used for French hubs relates to the Etablissements Cl. Pélissier, later Ets. Pélissier Père et Fils, which has been founded in 1909 by Claude Pélissier in Saint-Etienne, 10 rue Chomier. I am quite sure that there is no relation to the three racing brothers by the same name. Besides Pélissier other brands used by this company for their hubs were Primm-Hub, C.P. and Plume. I think it was in the early 1970 years when Perrin et Courson bought the Pélissier brand. As they operated together with Maillard a combined office of development the well-known Pélissier high flange hubs were also marketed under Perrin-Maillard.  ... Sources: -Bernard Chaussinand: L'Industrie du Cycle à Saint_ètienne et dans le bassin de la Loire - L'industrie du Cycle  
User Comments
Required
  Loading Comments

By pressing Verify below, you express verification that the photos shown are indeed of the component listed. Please do not verify if you are not sure that all photos are of the correct item. If you identify a photo that is NOT of the correct item, please use the Report feature to flag that photo.

Note: You can not verify photos that you have uploaded.
WeightSourceNotesAdded By
157 GramsActualFront hub w/o quick release fightfooter
211 GramsActualRear hub w/o quick release fightfooter
VeloBase v.2.8.7 - a Fischer Frameworks application, Copyright © (2024) - All rights reserved.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Find the information on useful? Please consider donating a few dollars towards the web-hosting cost. Thank you.