Campagnolo Sportman
Main Photo
Category:  Hubs
Name:  Campagnolo Sportman
Brand:  Campagnolo
Years:  1961 - ?
Country:  Italy
Added By: David Beck on 08/03/07
Updated By: peterbman on 01/28/16
Additional Photos - click for full size
Campagnolo SportmanCampagnolo SportmanCampagnolo SportmanCampagnolo SportmanCampagnolo Sportman
Gear Compatibility FreewheelFront Bearing Size/Count3/16" 10 x 10
Rear Bearing Size/Count1/4" / 9x9Rear Spacing120mm
Spoke Drilling36Flange SizeMedium Flange
Gear Threading/Pattern French: 1.366" x 25.4 tpi;
Italian: 1.378" x 24 tpi
Body MarkingsCampagnolo
Axle MaterialSteelShell MaterialAluminum
General Information
Straight skewers, nine 7.2mm holes. Sportman hub flanges have 9 holes instead of 8 on the Nuovo Tipo. The flanges of these hubs are 68mm diameter. Peter Adler: " The flanges aren't as high as the Gran Sport/Record/Nuovo Tipo; they're 68mm diameter, instead of 75mm. The holes are smaller than the round holes of the Nuovo Tipo and the large holes of the Gran Sport; 7.2mm instead of 10mm. The bearing covers are flat-sided, as are the transitions between the hub body and the inside of the flanges."
See Incorrect Information? Log-in to submit report.  
Additional Resources
Resources:Reference & ChartsCatalogsExternal Resources
User Comments
Required
  Loading Comments

By pressing Verify below, you express verification that the photos shown are indeed of the component listed. Please do not verify if you are not sure that all photos are of the correct item. If you identify a photo that is NOT of the correct item, please use the Report feature to flag that photo.

Note: You can not verify photos that you have uploaded.
VeloBase v.2.8.7 - a Fischer Frameworks application, Copyright ¬© (2024) - All rights reserved.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Find the information on useful? Please consider donating a few dollars towards the web-hosting cost. Thank you.